Electric Operated Double Diaphragm Pump Performance Characteristics:
1, No irrigation and water diversion is required, and the self-absorption capacity is up to 7 meters.
2, through the performance is good, the diameter of less than 10 mm particles, mud, etc. can pass effortlessly.
3, because the diaphragm will be delivered medium and drive mechanical parts separate, so the medium will never leak out. And pump itself without shaft seal, the service life is greatly extended. According to different media, the diaphragm can be divided into neoprene rubber, butadiene rubber, fluororubber, tetrafluorin, etc., can completely meet the requirements of different customers.
4, the pump body medium flow part, according to user requirements, can be divided into cast iron, stainless steel, PP,
Polypropylene,PVDF,aluminum alloy, motor is divided into ordinary type and explosion-proof type two.
Electric Operated Double Diaphragm Pump Data sheets:
|Max.Flow||126.8 gpm (480 lpm)||126.8 gpm (480 lpm)|
|Max.Working Pressure||58 psi (0.4 Mpa, 4 bar)||102 psi (0.7 Mpa, 7 bar)|
|Fluid Inlet Size||5 in.bsp (f)||5 in.bsp (f)|
|Fluid Outlet Size||5 in.bsp (f)||5 in.bsp (f)|
|Max.Suction Height(dry suction)||20 ft. (6 m)||20 ft. (6 m)|
|Max.Permitted Grain||3/8 in. (9.4 mm)||3/8 in. (9.4 mm)|
|Every Reciprocating Flow||2.0 gal. (7.6 L)||2.0 gal. (7.6 L)|
|Max. Reciprocating Speed||63 cpm||63 cpm|
|Outlet Pressure||0.4 Mpa||0.7 Mpa|
|Motor Power||4 KW||5.5 KW|
|Pump body structure||Cast steel Nodular cast iron Aluminum alloy PP Stainless steel PVDF||Cast steel Nodular cast iron Aluminum alloy PP Stainless steel PVDF|